upload
U.S. Department of Energy
업종: Government
Number of terms: 22108
Number of blossaries: 0
Company Profile:
In this type of closed-loop geothermal heat pump installation, the fluid-filled plastic heat exchanger pipes are coiled into circles and submerged at least eight feet below the surface of a body of surface water, such as a pond or lake. The coils should only be placed in a water source that meets minimum volume, depth, and quality criteria. Also see closed-loop geothermal heat pump systems.
Industry:Energy
In this type of closed-loop geothermal heat pump installation, the fluid-filled plastic heat exchanger pipes are laid out in a plane parallel to the ground surface. The most common layouts either use two pipes, one buried at six feet, and the other at four feet, or two pipes placed side-by-side at five feet in the ground in a two-foot wide trench. The trenches must be at least four feet deep. Horizontal ground loops are generally most cost-effective for residential installations, particularly for new construction where sufficient land is available. Also see closed-loop geothermal heat pump systems.
Industry:Energy
In this type of closed-loop geothermal heat pump installation, the fluid-filled plastic heat exchanger pipes are laid out in a plane perpendicular to the ground surface. For a vertical system, holes (approximately four inches in diameter) are drilled about 20 feet apart and 100 to 400 feet deep. Into these holes go two pipes that are connected at the bottom with a U-bend to form a loop. The vertical loops are connected with horizontal pipe (i.e., manifold), placed in trenches, and connected to the heat pump in the building. Large commercial buildings and schools often use vertical systems because the land area required for horizontal ground loops would be prohibitive. Vertical loops are also used where the soil is too shallow for trenching, or for existing buildings, as they minimize the disturbance to landscaping. Also see closed-loop geothermal heat pump systems.
Industry:Energy
In wastewater treatment or livestock facilities, a shallow pond used to store wastewater where sunlight and biological activity decompose the waste.
Industry:Energy
Independent power systems that are connected to an electricity transmission and distribution system (referred to as the electricity grid) such that the systems can draw on the grid's reserve capacity in times of need, and feed electricity back into the grid during times of excess production.
Industry:Energy
Individual rooms or zones in a building where temperature is controlled separately from other rooms or zones.
Industry:Energy
Infrared or radiant heat.
Industry:Energy
Insulation made from rockwool fibers, fiberglass, cellulose fiber, vermiculite or perlite minerals, and composed of loose fibers or granules can be applied by pouring directly from the bag or with a blower.
Industry:Energy
Large, flat boxes with glass covers and dark-colored metal plates inside that absorb and transfer solar energy to a heat transfer fluid. This is the most common type of collector used in solar hot water systems for homes or small businesses.
Industry:Energy
Large, flat boxes with glass covers and dark-colored metal plates inside that absorb and transfer solar energy to a heat transfer fluid. This is the most common type of collector used in solar hot water systems for homes or small businesses.
Industry:Energy
© 2024 CSOFT International, Ltd.